IBC Tote Accessories & Parts in Kansas
Replacement valves, caps, gaskets, heating blankets, mixers, pumps, liners, adapters, covers, pallets, and labels available through partner suppliers for Kansas and the Kansas City metro.
Commonly Requested Parts
2" Butterfly Valve
Valves
6" NW150 Fill Cap
Caps
EPDM Gasket Set
Gaskets
IBC Heating Blanket
Heating
Replacement Hardwood Pallet
Pallets
2" BSP to NPT Adapter
Adapters
IBC Liner Bag
Liners
IBC Spill Pallet
Containment
Basic IBC Repair Checklist
Users who handle common IBC tote maintenance in-house usually need the same short list of parts: a valve, a cap, a gasket set, and a way to treat cage rust.
Use this list as a starting point for a parts request. Each item can be requested individually through partner suppliers, and availability varies.
Request a QuoteTypical Parts
Common IBC Accessories and Parts
Here are the accessories and parts most often associated with IBC totes. Availability varies by partner supplier. Ask about compatibility and pricing in your quote request.
Valves & Ball Valves
2" Butterfly Valve
Standard bottom-outlet replacement. Commonly 2" BSP or NPT with an EPDM seal and a polypropylene or stainless body. Confirm thread and fit with the supplier.
2" Full-Bore Ball Valve
Less restricted flow than a butterfly valve. Often chosen for thick liquids, viscous oils, and slurries. Commonly polypropylene body with PTFE seats, in BSP or NPT thread.
3" Ball Valve
Oversized valve for high-volume discharge. Needs a matching outlet configuration, so confirm fit before ordering.
Cam-Lock Valve Adapter
Converts a threaded valve outlet to a cam-lock (cam and groove) fitting. Common types are C, D, and E, in stainless or aluminum.
Aseptic Valve
Used in pharmaceutical and high-purity food applications. Diaphragm-type and fully drainable. A specialty item, so ask whether a supplier can source it.
Spring-Return Valve (Dead-Man)
Self-closing valve that returns to closed when released. A safety feature for dispensing stations and unattended fill points.
Lever-Lock Ball Valve
Ball valve with locking lever to prevent accidental opening. Padlock-compatible. Ideal for chemical storage and security-conscious applications.
Fill Caps & Gaskets
6" NW150 Fill Cap
Replacement top fill cap for standard IBC totes. Commonly polypropylene with an EPDM seal ring, in vented or non-vented styles.
6" Screw Cap — Food Grade
Cap with a silicone gasket for food-oriented use. Ask the supplier for documentation and check current regulations for food contact.
Gasket Set (Full IBC)
Replacement gasket kit covering the top cap, valve stem, and outlet. EPDM or silicone compounds are common. Specify the compound in your request.
PTFE Valve Gasket
Chemical-resistant PTFE gasket for aggressive solvents, acids, or oxidizers. Ask about 2" and 3" sizes.
Breather Cap / Vent Cap
Vented replacement cap with a filter element that helps prevent pressure buildup during temperature changes. For closed storage systems.
Silicone Gasket Set
Full IBC gasket set in silicone. Silicone tolerates higher temperatures than EPDM and is common in food-oriented use.
Cap Wrench (6" NW150)
Specialized wrench for opening and tightening IBC fill caps. Reduces cap damage compared with improvised tools.
Adapters & Fittings
2" BSP to 2" NPT Adapter
Thread adapter for connecting an IBC outlet to American NPT plumbing. Useful for US installations.
Dip Tube Assembly
Allows bottom-of-bottle suction through the top fill port. Stainless tube with plastic fittings, in lengths for 275 and 330 gallon bottles.
Y-Strainer (2")
Inline strainer that installs at the outlet valve and catches particulate before it reaches downstream equipment.
Cam-Lock Set (4-piece)
Four cam-lock fittings: male adapter, female coupler, dust cap, and dust plug. Aluminum or stainless in various thread ends.
Tank-to-Tank Connector Kit
Connects two IBC totes for gravity transfer or series storage, with reinforced hose, clamps, and cam-lock ends.
Drum Pump Adapter
Adapts the IBC top port to accept bung-style drum pumps, turning the IBC into a portable dispensing station.
Hose Barb Fitting Set
Threaded male hose barbs in several sizes for connecting flexible hoses to IBC outlets. Polypropylene or stainless.
Manifold Tee (2")
Tee fitting for splitting the IBC outlet into two downstream lines.
Heating Blankets & Thermal Management
IBC Heating Blanket — 275 Gallon
Wrap-around electric heating blanket sized for 275-gallon totes, usually with an adjustable thermostat. Confirm voltage and ratings with the supplier.
IBC Heating Blanket — 330 Gallon
Heating blanket sized for 330-gallon totes, usually with an adjustable thermostat. Confirm voltage and ratings with the supplier.
Pallet Heater Pad
Heating pad that sits beneath the IBC on the pallet and heats from the bottom up. Often used for high-viscosity oils, greases, and waxes.
Insulated Cover / Jacket
Quilted insulating jacket that slips over the IBC tote to reduce heat loss. Works standalone or over a heating blanket.
Temperature Controller (Digital)
Replacement or standalone digital thermostat for IBC heating systems, typically supplied with a temperature probe.
Pipe Trace Heating Kit
Self-regulating trace heating cable for the IBC outlet pipe and valve. Helps prevent freeze-up of the bottom outlet in cold weather.
IBC Insulation Panel Set
Rigid insulation panels for IBC bottle sides and top. Reduces heat loss, and works with or without a heating blanket.
Pumps & Metering
Centrifugal Transfer Pump (1/2 HP)
Electric centrifugal pump for low-viscosity liquid transfer from an IBC to a tank, drum, or process line. Confirm voltage and flow with the supplier.
Drum / IBC Air-Operated Diaphragm Pump
Air-powered diaphragm pump for chemicals and solvents, including spark-sensitive environments. Wetted materials such as PVDF and PTFE are common.
Peristaltic Dosing Pump
Chemical dosing pump for injecting liquid additives into process streams, with chemical-resistant tubing.
Gear Pump (Viscous Fluids)
For viscous materials like syrups, oils, resins, and waxes that centrifugal pumps struggle with. Variable-speed models are common.
Inline Flow Meter (2")
Flow meter for measuring IBC discharge volume. Pulse output for a totalizer is common.
Batch Controller / Totalizer
Preset batch controller that connects to a flow meter and controls a pump or valve to dispense measured quantities.
Mixers & Agitators
Top-Entry Paddle Mixer
Mounts to the 6" fill cap with an electric motor and stainless propeller blade. For paints, fertilizers, resins, and emulsions.
Pneumatic IBC Mixer
Air-powered mixer for spark-sensitive environments. Runs on compressed air with a stainless impeller.
Recirculation Pump Kit
Pump kit with inlet and outlet hoses that routes fluid from the bottom outlet back to the top for blending without opening the tote.
Magnetic Drive Pump (1/2")
Seal-less magnetic drive pump for hazardous or high-purity liquids. No shaft seal means fewer leak paths.
Eduction Tube Mixer
Venturi-type mixer powered by existing pump flow. Creates circulation without a separate agitator motor.
Variable-Speed Mixer Controller
Variable frequency drive speed controller for top-entry mixers, allowing RPM control for shear-sensitive materials.
Liners & Containment
IBC Liner Bag (275 Gallon)
Polyethylene liner for 275-gallon IBC totes. Reduces cleaning between product changes. One-use.
IBC Liner Bag (330 Gallon)
Same idea as the 275-gallon liner, sized for 330-gallon bottles. Check valve outlet compatibility. One-use.
Multi-Layer Barrier Liner
Multi-layer liner for sensitive contents, offering oxygen and moisture barriers. Used in pharmaceutical and food applications.
Conductive Liner (Static Control)
Electrically conductive liner for contents requiring static control, such as flammable solvents and powders. Grounding is required.
IBC Spill Pallet (Single Tote)
HDPE spill pallet for one IBC. Secondary containment is commonly sized to hold the tote's volume plus an allowance. Check current requirements for your site.
IBC Spill Pallet (Double Tote)
Double-width HDPE spill pallet for two IBC totes side by side, with an optional center divider.
Containment Berm (Collapsible)
Collapsible foam berm with a liner that creates a temporary secondary containment zone around one or more IBC totes.
Protective Covers & UV Protection
Full IBC Rain Cover
Heavy-duty polyethylene cover protects the entire IBC (bottle + cage) from rain and UV during outdoor storage. Elastic hem, cinch tie.
UV-Resistant Bottle Sleeve
Wraps the HDPE bottle only. Prevents UV degradation and algae growth in clear-bottle totes used for water storage.
Cage Rust Inhibitor Paint Kit
Zinc-rich primer and topcoat for treating IBC cage rust. Helps extend cage life in outdoor or humid environments.
Drip Pan / Spill Pallet
HDPE spill pallet sized to fit one or two IBC totes. Check current secondary containment requirements for your site.
Cage Corner Protectors
Rubber or plastic protectors for IBC cage vertical posts. Reduces fork damage during handling and storage.
Pallet Replacements
Replacement Softwood Pallet
Standard 48×40 pine pallet for IBC cage bases. Confirm fit with the supplier.
Replacement Hardwood Pallet
48×40 hardwood pallet, often with steel corner brackets, for repeated heavy loading.
HDPE Plastic Replacement Pallet
Solid-deck HDPE pallet with notched forklift entry. Waterproof, chemical resistant, and washable.
Steel Pallet Base
Welded steel pallet base for extreme-duty applications or racking. Often galvanized.
Composite Replacement Pallet
Plastic/wood composite pallet. Moisture resistant and lighter than hardwood. Load ratings vary by manufacturer.
Labels & Marking Supplies
IBC Content Label (Blank)
GHS-format blank content label for re-labeling reused totes. Weatherproof and UV-resistant.
GHS Hazard Labels (Sheet)
GHS pictogram sticker sheets for labeling totes containing regulated materials. Weatherproof.
UN Mark Label Kit
Marking supplies for IBCs. Re-marking is regulated, so check current 49 CFR requirements before use.
Paint Marker (All-Surface)
Industrial oil-based paint marker for writing directly on HDPE or steel cage. White, yellow, or black. Permanent, waterproof.
Asset Tag Set (QR Code)
QR code asset tags for tracking a group of IBCs. Weatherproof with strong adhesive.
Compatibility Guide: Valves & Fittings by IBC Type
Many standard IBCs share a similar valve and cap interface, but there are exceptions. Check this table before ordering if you are unsure.
| IBC Type | Valve Thread | Cap Size | Compatible With | Notes |
|---|---|---|---|---|
| Standard HDPE-and-cage IBC | 2" (BSP or NPT, varies) | 6" fill cap | Most standard valves, caps, and gasket sets | These designs share a widely used interface, but confirm thread and cap type with the supplier. |
| Imported or Unbranded IBC | 2" (BSP or NPT, verify) | 6" fill cap (verify) | Verify thread spec before ordering. Some use a different outlet or cap style | Imported IBCs vary. Confirm the thread standard (BSP vs. NPT) and cap size before ordering. |
| Older Units | Varies | Varies | Compare the old part against the replacement before ordering | Older bottles may use different valve or cap fittings. A photo and the UN plate details help a supplier confirm. |
| Composite / SS Inner IBC | Varies, often 2" or 3" | Varies | Provide the exact make and model; compatibility varies significantly | Stainless inner composite IBCs often use different valve and cap standards. Adapters may be available for some configurations. |
Not sure? Include the UN marking plate information from your IBC (usually a metal or printed label on the cage) and a photo of the part in your quote request so a partner supplier can help confirm fit.
Installation Guides for Common Accessories
Many IBC accessories can be installed without special tools or training. Here are general guides for three common installations. Always follow the manufacturer's instructions for your part.
Replacing an IBC Butterfly Valve
- 01Ensure the tote is empty and depressurized before beginning.
- 02Place a drain pan under the outlet to catch residual liquid.
- 03Unscrew the old valve counterclockwise using a valve wrench or pipe wrench with jaw protectors.
- 04Clean the outlet threads on the bottle with a damp cloth and inspect for thread damage.
- 05Apply thread tape suited to the contents to the new valve's male thread, wrapping in the direction of tightening.
- 06Thread the new valve on by hand until snug, then tighten slightly with a wrench. Do not overtighten.
- 07Test with water before returning to service. Open and close the valve several times to confirm smooth operation.
Installing a Heating Blanket
- 01Place the IBC tote in its permanent location before installing the blanket. Do not move a tote with a connected heating blanket.
- 02Wrap the heating element around the bottle section of the tote, following the manufacturer's instructions.
- 03Secure the blanket using the built-in straps so the element contacts the bottle surface evenly.
- 04Attach the temperature probe to the bottle surface as the manufacturer directs.
- 05Set the thermostat to a target suited to your material, staying within the limits for HDPE and for the product.
- 06Plug into a properly rated grounded outlet. Do not use ungrounded outlets or unsuitable extension cords.
- 07Monitor temperature during the first heat-up, because a full, cold tote takes a long time to warm.
Installing a Dip Tube Assembly
- 01Measure the interior depth of the bottle from the 6" fill port opening to the bottle base.
- 02Cut the dip tube to length, leaving a small clearance at the bottom.
- 03Attach the male adapter fitting to the top of the tube and thread it into the fill cap assembly.
- 04Install the dip tube and cap assembly onto the tote fill port, tightening to full engagement.
- 05Connect your pump inlet hose to the outlet fitting at the top of the dip tube assembly.
- 06Test for leaks at the cap-to-bottle interface with water before using with your actual product.
Commonly Used Accessories by Industry
Different industries have different IBC maintenance and accessory needs. Here is what buyers in each sector commonly look for.
Agriculture
- →2" Butterfly Valve (replacement)
- →EPDM Gasket Set
- →UV Bottle Sleeve (outdoor storage)
- →Tank-to-Tank Connector Kit
- →Cam-Lock Set for spray equipment
Food & Beverage
- →Food-compatible Ball Valve
- →Silicone Gasket Set
- →IBC Liner Bag (single-use)
- →Multi-Layer Barrier Liner
- →Sanitary fittings, if the supplier carries them
Chemical & Industrial
- →PTFE Gasket Set (chemical resistant)
- →Conductive Liner (static control)
- →IBC Spill Pallet
- →Air-Operated Diaphragm Pump
- →Y-Strainer (in-line filtration)
Landscaping & Water Hauling
- →Full-Bore Ball Valve (fast drain)
- →Hose Barb Fitting Set
- →Rain Cover (outdoor storage)
- →Cam-Lock Set
- →UV Bottle Sleeve
Manufacturing
- →Heating Blanket (viscous materials)
- →Top-Entry Paddle Mixer
- →Inline Flow Meter
- →Batch Controller
- →Gear Pump (for oils and resins)
DIY & Homestead
- →Ball Valve (rain barrel)
- →Hose Barb Fittings (garden hose)
- →Dip Tube Assembly
- →Drip Pan / Secondary Containment
- →UV Sleeve (water storage)
Will It Fit My Tote?
Many IBC totes share a similar valve and cap interface: a 2-inch bottom outlet and a 6-inch fill cap. That makes common valves, caps, and gaskets interchangeable across many units, but the thread type and cap style still need to be confirmed.
Exceptions exist for older units, composite or stainless IBCs, and some specialty models. If you are unsure, include the brand and model (often on the UN plate) in your request.
For thread differences between BSP (British Standard Pipe) and NPT (National Pipe Thread), adapters are widely available in brass and polypropylene.
Requesting Parts
Operators and maintenance teams with predictable parts needs can describe them all in a single request. A partner supplier follows up with what is available.
Submit a Quote Request
Use the quote form. Include the part name, quantity, and your IBC brand and model if relevant.
Get Matched
Your request is matched with a partner supplier in our network.
Supplier Follows Up
A partner supplier follows up about availability, pricing, and delivery or pickup.
Ongoing Needs
If you expect to need the same parts regularly, mention that in your request so the supplier can respond accordingly.
Accessories FAQ
How do I know which valve fits my IBC tote?+
Many IBC totes use a 2-inch bottom outlet, but the thread type (BSP or NPT) and valve style vary. Check the thread on your outlet, note any markings on the UN plate (usually on the cage), and include that in your request so a partner supplier can confirm the fit.
What is the difference between BSP and NPT threads?+
BSP (British Standard Pipe) and NPT (National Pipe Thread) are different thread standards that are not interchangeable. Forcing them together will cross-thread and can destroy both fittings. BSP has parallel threads (BSPP) or tapered threads (BSPT), and NPT has tapered threads. Many US plumbing fittings and pumps use NPT. Adapters exist to bridge the two systems. Specify which you need.
Can I request single parts or only kits?+
You can ask for either. Describe the part, quantity, and your tote type in your quote request, and a partner supplier follows up on what is available.
Can I use an EPDM gasket for chemical storage?+
EPDM is compatible with water, many agricultural chemicals, food products, dilute acids, and mild alkalis. It is generally not compatible with concentrated petroleum products, aromatic solvents, or chlorinated compounds. For aggressive chemicals, PTFE gaskets are common. For food-oriented use, silicone is common. If you are unsure, check the product's safety data sheet and ask the supplier to recommend a compound.
Do heating blankets need special wiring?+
That depends on the model. Many plug into a standard grounded outlet, while larger or industrial models may need a dedicated circuit. Check the manufacturer's electrical requirements before ordering, and use a properly rated grounded outlet only. Do not use ungrounded power sources.
Are IBC liner bags single-use?+
Standard polyethylene IBC liners are designed for single use. Their value is in reducing the cleaning needed between product changes. Multi-layer barrier liners for sensitive applications are also generally single-use.
How long does it take to get accessories and parts?+
Availability varies by partner supplier and by part. Common items such as valves, caps, and gaskets are generally easier to source than specialty or custom items such as aseptic valves or stainless composite fittings. Mention any deadline in your request.
Can I request parts for several totes at once?+
Yes. Include the part names, quantities, and tote type in your quote request. Pricing comes by quote from partner suppliers.
Can't Find the Part You Need?
If it goes on an IBC tote, ask about it. Describe the part in a free, no-obligation request and a partner supplier follows up about availability or a compatible alternative.